Liqui Moly Foam Air Filter Oil
- Special oil for wetting foam air filters
- Outstanding adhesive properties
- Sand and dust are reliably trapped in the oil, preventing greater wear on the engine
- Increases engine service life
- Water-repellent effect
- Does not 'resinify' or roam
- Suitable for all two-stroke and four-stroke motorbikes using foam air filters
Special oil for wetting foam air filters. Thanks to the outstanding adhesive properties of the liquid, sand and dust are reliably trapped in the filter, preventing greater wear on the engine. Increases engine service life. Water-repellent effect. Does not resinify or foam. The blue colour when the filter is wetted helps to ensure uniform application.
Suitable for use on all 2-stroke and 4-stroke motorbikes with air or water-cooled engines using foam air filters.
Application
Fill Motorbike Air Filter Oil into a suitable container. Remove coarse contaminants from the foam air filter by knocking it out. Then place foam air filter in the container filled with the Motorbike Air Filter Oil and thoroughly massage the air filter several times. Before installing the foam air filter, allow it to dry out for 10 to 15 minutes.
When working with Motorbike Air Filter Oil, make sure that the area is well ventilated.
You may also like...
You won’t get it cheaper. Our Price Match Promise.
Find it cheaper at any major motorcycle accessory retailer, online or in-store and we‘ll match it.
How to request a price match.