R&G Racing Elevation Rear Paddock Stand

Needs some force to assemble. I used a rubber mallet and some silicone spray.

Works perfectly with my Versys. High quality product

Having used a paddock stand that twisted lifting my bike I was a bit nervous this would be the same, but I needn't have worried, a bit of silicone spray was needed to assemble it but apart from that it's been brilliant!

Does the job
Not a flush fit when fitting

Excellent quality, heavy duty, looks and feels the part. Not difficult to put together...just need a bit of force. Most importantly, it works very well and gives me confidence it won't fail in action.

There is no diagram so I checked the excellent SportsBikeShop website to make sure I had the handle the correct way round.
It is difficult to put together so I doubt you'd get it apart if you did go wrong!
I used washing up liquid on the joints to ease assembly.
Once assembled it is very sturdy. The wheels are good, its not very heavy and the powder coat looks neat.

Easy to put together and seems good quality. Hard stand to use on my ninja 650 alone as I'm a petite lady so it's a 2 person job to get the bike on it.

First class product and just what I needed. Service from Sportsbikeshop was also brilliant. Thanks guys.

No instructions and was difficult to put together. I did not want to force it but eventually had to use force which worked.
Once it was fixed works very well and strong product.

With only a side stand, by far the easiest way to remove the rear wheel. Good quality stand and easy to use.

Good build quality. You have to use some body weight to assemble it but nothing too difficult.
Very easy to use then by yourself to get on and off.

Works very well, great quality and very strong

This stand is strong there is no movement when it picks the bike up. They are quite hard to push together so used a heat gun to warm the plastic parts but when together they have no movement. They are quite easy to use.

R&G Paddock Stand. Took some effort to assemble as the two support tubes are a force fit into the loop tube (no bolts). Used some WD40 which helped. Very well designed and manufactured, a quality item.

Great paddock stand, easy to assemble and makes cleaning the chain, oil / filter changes a breeze.