This is my third ScottOiler. Had a larger one for G650gs, and a Micro version like this for my 77’Honda 400/4. It’s very easy to fit, with both printed information and diagrams, and also some of their uTube video’s. This recent purchase for my 2nd 76’ 400/4. For these bikes I utilised the small port on the side of the engine to which you would normally use a small fitting to link to a set of Carburettor ‘balancing gauges’. For this, I called the company for a small ‘Spigot’ with the correct ‘universal’ 5mm thread. It was delivered within two days at no cost. Brilliant service as I had found before. On top of keeping the chain lubricated, with an adjustable flow of one small drop of oil per minute, and residue, which might get onto the rear wheel rim, is not only minimal, but also very easy to wipe off. These products have worked out to be cheaper than when I was using chain sprays, and minimal other chain maintenance. I find this Micro version great and unobtrusive for my little Hondas. Their is also a ‘posh’ version, which you can operate from the handle bars, to adjust the flow, and could be useful on say off road bikes when going into a very wet/sandy area. These top-end devices also have other functions, I believe. To adjust these ‘manual versions’, it’s a 5second second job to just turn up or down the flow rate onto of the device. This is also used to ‘prime & purge’ when it’s fitted for the first time. I see many bikes at bike-nites’, with chains in poor condition, and there’s really no need, when you consider what a vital job they do in the running of your bike.