MotoGP Front Head Stand
Customer Product Reviews
Really easy to assemble and use
The largest pin fits my Suzuki SV650 AL7 ... and makes raising the front wheel a 15 second job. On my bike, care needs to be taken to avoid the front brake hose, but other than that, it's straight-forward to use. One trivial issue, is that the spring clips kept getting displaced out of position - since the linkage sometimes comes in contact with the ground. The solution, is just to tap them through, into the "2nd" position.
Pins don't fit the bottom yoke of a Tuono
The stand comes with a range of pins to fit the bottom yoke, biggest one is 17mm bottom yoke of a Tuono has 26mm hole, had to make a packer up myself to be able to use. Other problem was the carrier, first parcel turned up damaged, parts bag had split with what was left of the pins and brackets etc. loose in the box. Sportsbikeshop collected and sent a replacement straight away, still waiting for that one to turn up, Sportsbikeshop send a third one out again straight away and that one turned up. Actual product quality is pretty good but they should state which bikes it does or doesn't fit
I already have the Moto GP rear stand and the headstock stand is built with the same robust tubular steel, solid welds and great finish. Wheels and bears move freely but a little squeaky but nothing a bit of lubricant can't sort. The stand comes with a range of pins to fit the bottom yoke. Performs effortlessly and makes a massive difference for cleaning and maintenance on your bike. A little more than a front stand that supports under the brake calipers, however this is more versatile as you can move the bars / wheel to allow better access, as well as work on the brakes themselves. Defiantly worth the extra for the work I do on the bike. However if you just need something to lift the front for minor maintenance and cleaning Moto GP do the other style front stand as well. Sportbikeshop are priced really well have excellent customer service and are always on hand if you need a question answered
This is a well made product but I'm not sure it's right for a Honda NC750X. I had to place wooden boards under the paddock stand wheels to get enough height to get the front wheel off the ground. The worst was that the pin collides with the brake hosing behind yoke. This could be dangerous if it gets damaged.