Rev'it Livengood Gore-Tex Gloves - Black

Really please as these fit amazing

A solid glove at first but seemed to last only one year.

Warm up to 5-10 degrees but these gloves are meant to work with heated grips mainly as they have Gore Grip which means you get better tactile feeling on bike controls.

Sizing is off so you need to go 1 up size and strangely the finger length seem to on bigger size.

My gripe with all this Revit range is that they use a soft material to wipe the visor and that soft material is the gloves weakness. After 12 months it gave in with abrasion on the bike controls and the glove started to leak in the thumb area.

I really wanted to like this glove as I love Revit products but this design has a major flaw the neoprene visor wiper which will degrade much faster than leather or a abrasion resistant textile.

Been using them over the winter together with the inner gloves and worked like a charm. Any condition including extreme rain for 2h. All dry. I would recommend buying size bigger as that came in a US size I guess

These are a good pair of gloves, the quality is obvious to see.

They are quite stiff I found, have been using them for 2 weeks and they are better but still stiff.

Sizing is appropriate in my view I'm a medium and I purchased a medium and have room for inner liners. The fingers however are long for some reason. They're not unmanageable though.

There is good protection in all the right places and the inner liner doesn't pull out as you take your glove off.

They're supposed to be designed for heated grips but I can't tell any benefit between my other winter gloves that are not designed for this purpose other than less padding on these which helps with tactile feel.

I have oxford heated grips and bark buster hand guards on my z1000sx and my finger tips still get cold. not uncomfortably cold or even so much for me to notice during a ride so much, but mostly when I get off.

Only very mild showers so far but no issue there and with gore tex and SBS's customer service I'm not concerned if I do have problem down the line.

Inter is comfortable with no edges or seams to irritate you.

Would be interesting to try the borealis or Taurus to see if they are any warmer but that would be an expensive proposition!

These gloves perform as well as they claim. With heated grips your hands are kept warm at temperatures down to zero. I took them to -2 degC for 20 mins and they just about kept numbness from the bulk of my hands but finger tips were slightly numb. Dexterity is good since they are not too thick. It is a big benefit that they do not have a separate lining since that means you can easily put them on and take them off without worrying about pulling the lining out of the fingers. Best without additional lining gloves as they insulate your hands from heated grips too much and stop heat getting through. The fastener mechanism can be ignored all together but it does work and the cuff is small enough to fit under your jacket sleeve and make a good seal. Don't expect the cuff to go outside of a good winter jacket sleeve.

I chose these because they are designed to work with heated grips, the thinner palm side allowing the warmth through & helps with feel. As I normally prefer the dexterity of thinner gloves these took a little time to acclimatise but broke in quickly. Lovely warm inner feel & totally waterproof, as you would expect from Gore Grip technology