GBP / United States
Oxford Heated Premium Hot Grips - Sports
Heated grips specifically for sports bikes
View full details
Our price
Customer Reviews for Oxford Heated Premium Hot Grips - Sports
Easy to fit and so far brilliant to use.
I have fitted these to my 2017 CB500F so can only speak about the ease of fitment in relation to my bike. However, it was actually very easy. Everything fitted exactly as it should and the only difficult bit was deciding on the cable routing under/round the tank. The Grips went straight on with no fuss as well. (Tip - go careful with the superglue). I've only used them once when the temperature was 4deg and had to turn them down because they were too warm. So, in summary, I'm really impressed! Thanks SBS again for excellent delivery and service.
Read moreJust buy them!
For the money, these grips are ace, kept my hands warm on a long cold trip to Mull recently. Glad I fitted them before the trip!
Read moreGreat fit!
Prompt delivery as always. Really straightforward to fit, I have a CB600F-6. I got a cup of freshly boiled water to loosen the rubber of the grips, and they slipped right on. Fantastic instructions from Oxford, cannot recommend enough.
Read moreI am a believer
A regular commute of 40 miles each way rain or shine. I had been depending of keeping my core temp up and double gloving, but there is a limit to how thick you can go and I was still arriving with frozen fingers. In use I haven't got above 50% heat. Even then I usually blast it to warm through for a minute and then knock it back. Working hands is a safer condition. I had put this off because I thought the CBR500R was a difficult install. I turns out that it wasn't. The old grips are easier to get off if you use a hair drier or heat gun. Once removed, the throttle side is knobbly but that comes off with a knife or chisel. The inner edge needs to be cut away but that sounds worse than it is. You will thank yourself for using masking tape and covering all of your bike with a cloth when using the super glue. So, 2 hours including mucking about with fairing an doing a super neat install. …. and then, it just works.
Read moreOxford heated grips
Very good product for the price. They would be very easy to fit on most bikes bit of pain on mine as the throttle side oem grip was moulded to the plastic sleeve so had be sliced off and sanded but once that was done the oxford grip slid straight on nice snug fit. They work well and look nice and neat no complaints really good quality for a pretty small price I think.
Read moreYou need these!
I've bought these twice now for two different bikes. If you ride through winter these are essential, and the Oxford ones are toasty warm, easy to use and don't drain your battery (you can't accidentally leave them turned on). Highly recommend
Read moreFirst rate grips
I always fit the Oxford grips to my bikes. They are easy to fit, efficient in operation and come at a great price from Sportsbikeshop. Highly recommended.
Read moreHighly Recommend
Great, easy to install and look good, heat up and keep hands warm in seconds
Read moreHeated grips
Very impressed with these grips , gets really warm and you don't even think that it's a cold day when they're on.
Read morePress Reviews for Oxford Heated Premium Hot Grips - Sports
Oxford Heated Premium Hot Grips - Sports
- Soft, ultra-grippy diamond tread
- 5 heat settings
- Discreet moulded wire arrangement
- 1-piece moulded construction
- Can be cut down if required
- Raised buttons for use with gloves
- Battery saving mode
- Handlebar switch bracket included
- Suitable for 22mm handlebars
- Rain proof switch
- Draws under 4A
- Length: 123mm / 114mm
Moulded wiring arrangement is both durable and discreet, 1-piece moulded construction ensures unrivalled performance and reliability. Grip design fits the vast majority of bikes, but can be cut down to size if required, intelligent electronic temperature control comes complete with mounting bracket Soft ultra-grippy rubber provides comfort and feedback.
fitting guideAbout
Oxford
Established in 1973, Oxford is now one of the world's leading suppliers of products to the two-wheeled industry. From its base in Oxfordshire, the company distributes to over 75 partners worldwide and has its own subsidiary in Jacksonville, Florida, serving both North and South America. Its huge range of products encompasses everything which makes life on bikes better; from clothing and helmets to accessories, hard parts, locks and luggage and more!
See all Oxford products…Questions and Answers
Recently bought a Honda Hornet 600 (2006 naked) could you please advise if these would fit my motorbike? Thank you
April 1, 2019Either these or the touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi which would be the best for a 2019 cb1000r and is there any difference between the sports and touring models ! Thanks
March 26, 2019The Sports grips have a different grip pattern and length to the Touring grips. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi, I have a er6f 2015. will these fit on this model? Thanks
February 5, 2019These will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you measure the grips that you already have fitted, you may find that the Touring grips are a more suitable length.
Good day. I have a Kawasaki Vulcan S 650 2018 I was told that my bike has 1 inch dia bars is there away you could confirm this and tell me the best one's for my bike please, there are so many numbers I am not sure which ones to choose from. Thank you for any help you can be.
January 15, 2019As far as we are aware, the bars are 22mm diameter, but we would recommend checking this with your Kawasaki dealer. If they do measure 1 inch, the only Oxford grips that would fit will be the Cruiser grips.
Can these be used on a Honda cb125F 17 plate?
January 8, 2019The Sports or the Touring grips should be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Are these the right grips for an '08 Ducati Monster m696?
December 31, 2018The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi will these fit on my Kawasaki Z 1000 SX 2017 model Thanks
November 5, 2018The grips are not supplied with a specific model application list but are designed for 22mm handlebars.The grips are 123mm as standard, but can be trimmed down to 114mm.
Do they come with warranty?
November 2, 2018These grips have a 2 year warranty.
Do these grips drain battery? I bought these before and it did kill my battery although I'm not sure if those grips were faulty as they never actually got warm enough when you turned them on. I was told to return them for a refund as there might have been a fault with the heat controller.
October 29, 2018The grips should not drain the battery when the engine is running, unless there is a fault with your motorcycle's charging system. If the grips are left on when the ignition is turned off, the controller will sense a drop in the bikes battery voltage, and turn the grips off.
Hello will they fit a 2000 kawasaki zx900r?
October 26, 2018Either the Sports or the Touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Will these grips fit my Suzuki GSF Bandit 650?
October 2, 2018Either the Sports or Touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Do these heated grips come with some sort of fuse when connected to your battery? Thanks!
August 16, 2018The power lead has a in-line 5amp fuse fitted.
Can this type of grip be fitted to a bike with ride by wire throttle? Thanks
August 14, 2018Yes, these only slip over the throttle tube so shouldn't cause any issued.
Hello Will these fit a 2018 Kawasaki Ninja 650?
August 6, 2018Either the Sports grips or the Touring will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi, do these grips turn themselves off when you turn off the ignition or do you have to do it manually?
June 13, 2018They will turn off with the ignition if you connect them to the bikes wiring loom. If not wired to the bikes loom, the Battery Saving Mode protects against flat batteries. If you forget to turn the switch off, it will do it for you!
Hi would these fit a 2010 triumph street triple? Many thanks Richard
May 28, 2018Yes, these are sold as universal units so should fit your motorcycle.
Will your grips fit a 1988 659 Africa twin and if so which version would you recommend
May 23, 2018The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit. The bars must also be 22mm.
Can the original bar ends still be fitted after the hot grips are in place ? MT 09 2018.
May 14, 2018You should have no problem re-fitting the original bar ends.
Will they fit a 2005 sv650s without any cutting
May 4, 2018The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least/no trimming to fit.
I have a Harley Davidson street rod 750 with bar end mirrors the OEM grips are approx 115mm would you recommend these or the touring grips? Thanks in advance
April 26, 2018Either will be fine as long as your handlebars measure no bigger than 22mm in diameter. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi. Will these fit a 2018 GSXS-750? Cheers,
February 26, 2018Either these or the Touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi, what is the outside diameter of the sport grips Cheers Dave
February 21, 2018The outside diameter of the Premium Sports Hot Grips is 32mm.
Which heated grips would fit my 2012 Suzuki Hayabusa, the Sport ones or Touring ones? Many thanks, Ryan
January 15, 2018Either will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Will this fit my Kawasaki Z800 2013?
December 27, 2017Either these or the Touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Will the sports fit a triumph street triple rx 2015? What's the difference in length between the sports and touring please?
December 27, 2017The Oxford Heated Premium Hot Grips - Sports will fit your Triumph, the end of the grips may need trimming. The touring grips will also fit, the only real difference is the length of the grips and the pattern on the grips. If you measure your original grips and compare these to the lengths shown on the web page, the touring grips may need less trimming to fit.
Will these fit my BMW G310R 2017?
December 20, 2017The sports hot grips will fit your BMW, but may require trimming.
Hi, will these fit a Suzuki gsx1000?
December 11, 2017These or the Touring grips will be fine for your Suzuki.
Will these fit a 2009 z1000?
December 8, 2017Either these or the Touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Hi, considering purchasing these as a gift for my husband. He has a Kawasaki zzr600. Will they be ok? Many thanks.
December 1, 2017Either these or the Touring grips will be fine. The end of the grips may need trimming to fit - the maximum uncut and cut lengths are shown on each item. If you can measure the grips that are already fitted, the ones to purchase are the grips that require the least trimming to fit.
Will these fit my guys Yamaha XJR1300 please ?
December 1, 2017The Sports or the Touring grips will be fine - if you measure the length of your standard grips, and choose whichever grips would require the least trimming. The maximum uncut length and the maximum cut length are shown for each product.
What model reference number is quick find 101831 heated grips. I like the EL800 and hope these are them. Will they fit on a BWM G310R? Thanks
November 30, 2017The Oxford code for quick find number 101831 is OF692. The best grips for your bike will be the ones that need trimming the least - if you measure your standard grips, the maximum uncut length and the maximum cut lengths are shown for each set of heated grips.
Can you get oxford heated grips with 150mm in length
November 23, 2017Unfortunately we do not have any heated grips listed in the length you require.
I have put the grips on my 125er and they hang over a bit on the end so I can get my balance bits bk on can I trim the ends down with put damaging the heating up process???
November 22, 2017The ends can be trimmed, if you look on the fitting instructions under D - fitting procedure, it shows the trim lengths.
Will they fit aprillia rs 50 or 125 ??
November 21, 2017Yes, as long as the bars measure 22mm and have not been changed from standard. They may require trimming to fit.
Would these be suitable for a vfr800? (2002)
November 17, 2017The Sports or Touring Premium grips will be fine, they may require trimming.
Would these be suitable for a vfr800? (2002)
November 17, 2017Yes, these or the Touring grips will be fine. They may need trimming.
Hi, looking to purchase the Oxford heated premium hot grips - sports for my Honda cbr 600fy year 2000. Can you confirm that they will fit this model. Thank you
November 13, 2017We can confirm that these will fit your motorcycle. You may need to trim the grips slightly to fit your bar length.
Hi, Will these fit a 2007 Kawasaki ZX-6R?
November 8, 2017The Premium Sports grips will fit your Kawasaki with no issues - they may require trimming slightly.
Hi, will these grips fit on 2006 Honda CBR 125? Many Thanks!
October 31, 2017We confirm that the grips will fit your Honda CBR 125.
Hi, I'm new to riding and have a Honda cbr500r. Just a question about how waterproof the connectors are. When installed, are they safe when washing my bike or is it best to wrap the connectors in electrical tape or something else? Cheers
October 30, 2017The connectors will be fine when washing your bike - however, it cannot hurt to wrap them in electrical tape when fitting - I have done this to mine in the past.
Will these fit zx636a1p?
October 16, 2017The Sports grips will be fine on your Kawasaki.
Will the Oxford sports bike hand warmers fit my triumph street triple
September 15, 2017The Oxford Premium Hot Grips Sports will fit your Street Triple.
Hi Can you please tell me the difference between the sports and touring grips? Kind Regards Nathan
September 13, 2017The only differences are the pattern of the grips, and the length of the grips.
Will these or any of the other Oxford Hot Grips fit the Kawasaki ER6N 2016? Thanks!
September 12, 2017The Sports or the Touring grips will fit your ER6N
will theses fit z1000 2016
August 31, 2017The Oxford Heated Premium Hot Grips (sports) will fit your Kawasaki Z1000.
Hi would these grips be suitable for a Suzuki SV650 2017. Thanks
August 24, 2017You should have no problems at all fitting them to an SV650.
Will these fit a 15 plate Ducati scrambler classic?
August 21, 2017Provided the bars have a diameter of 22mm, the grips should fit ok. The working length is 123mm / 114mm and the grips can be cut down to within this size range if required.
Hiya, do these have the auto turn off feature built in?
August 7, 2017Yes they do, it is called the battery saving mode.
Hi there, will these fit a Yamaha MT07?
August 7, 2017Yes, these grips are designed to have a universal fitment and will fit most motorcycles.
Will these grips fit my 1997 Kawasaki ZZR1100 D5 ?
March 12, 2017The Oxford Heated Premium Hot Grips - Sports will fit your Kawasaki, the end of the grips may need trimming. The touring grips will also fit, the only real difference is the length of the grips. If you measure your original grips and compare these to the lengths shown on the web page, the touring grips may need less trimming to fit.
Will these fit a 1998 Honda CBR 600 F3
February 27, 2017These will fit your CBR600 F3 - the grips may need trimming to the correct size.
Will the grips fit my yamaha diversion 900
February 24, 2017The Oxford Heated Premium Hot Grips - Sports will fit your Diversion 900, the end of the grips may need trimming.
Hi would these grips be suitable for a triumph street triple 675 2008. Thanks
February 14, 2017These grips will fit your Street Triple 675.
are these grips suitable for aluminium handlebars?
February 7, 2017The grips are suitable for use on aluminium bars
The handle bars on my 2008 kawasaki Z1000 measure in at 26.5mm, do you have any oxford heated grips that fit?
July 14, 2016With bars that size you would need to use the Oxford Hot Hands - even the Cruiser grips only fit bars of 1 inch diameter.
Will these grips fit on a 2011 yamaha R1?
March 27, 2013The grips are not supplied with a specific model application list but are designed for 22mm handlebars and have lengths of 123mm/114mm.
Can you please confirm that these are the very latest version of the grips (2012?)
March 4, 2013The Grips are from the current Oxford range.
